Premalatha Kanniyappan¹, B. Saravanan², E. Thulasiram³

¹Premalatha Kanniyappan M.D.S., Reader, Department of Orthodontics, Tagore Dental College and Hospital, Chennai 600 015 ²B. Saravanan, Associate Professor, Department of Orthodontics, Sree Balaji Dental College and Hospital, Bharath University, Pallikaranai, Chennai-600100 ³E. Thulasiram, Post Graduate, Department of Orthodontics, Sree Balaji Dental College and Hospital, Bharath University, Pallikaranai, Chennai-600100  

DOI : https://dx.doi.org/10.13005/bpj/762

Abstract

To obtain a good occlusion with the correct overjet and overbite. there should be an  harmony between the combined mesiodistal widths of maxillary and mandibular teeth. Extraction of premolars is routinely carried out in orthodontic treatment which changes the ratio of  inter arch tooth size relationship. Till date Bolton’s analysis remains the golden standard for predicting interarch tooth-size discrepancy.

1. To investigate whether the extraction of four premolars as a requirement of orthodontic therapy is a factor in creating tooth size discrepancy
2. To determine whether any tooth extraction combination creates more severe discrepancies.
3. To investigate the reasons behind such discrepancies if determined due to any extraction combinations.

48 pretreatment models (30  Class I and 18 Class II) with  an ideal Bolton’s tooth size ratio of 91.3% ± 1 SD were taken and Bolton’s analysis -the overall ratio, anterior ratio and Bolton’s discrepancy was calculated.  Hypothetical tooth extractions were performed with the following combinations.

1. All first premolars
2. All second premolars
3. Maxillary first and Mandibular second premolars
4. Maxillary second and Mandibular  first premolars                                                                  and subjected  to Bolton’s analysis

Mesiodistal dimensions of all premolars were measured and the data is evaluated to find any variation between right and left sides or between the arches The Maxillary first and Mandibular second premolars extraction group produced the highest discrepancy followed by all first premolars extraction group. The all-second premolars extraction group produced the least discrepancy.  

Keywords

Bolton’s analysis; Mesio distal width; Anterior tooth ratio; Overall tooth ratio; Tooth size arch length discrepancy; Extraction combinations    

Download this article as: 

Copy the following to cite this article: Premalatha Kanniyappan P, Saravanan B, Thulasiram E. Changes in Traditional Bolton’s Ratio with Various Extraction Combinations - An in Vitro Study. Biomed Pharmacol J 2015;8(October Spl Edition)

Copy the following to cite this URL: Premalatha Kanniyappan P, Saravanan B, Thulasiram E. Changes in Traditional Bolton’s Ratio with Various Extraction Combinations - An in Vitro Study. Biomed Pharmacol J 2015;8(October Spl Edition). Available from: http://biomedpharmajournal.org/?p=3382>

Introduction

One of the goals in comprehensive orthodontic treatment is to obtain a best possible functional and esthetic result for the patient at the end of treatment. There are many factors that influence the attainability of this goal, one of which is the relationship of the total mesiodistal width of the maxillary teeth to that of the mandibular teeth.

Over the years many investigators have attempted to quantify this relationship. The mesiodistal widths of teeth were first formulated by Black in 1902¹.  In 1923 Gilpatric² calculated that the total mesiodistal tooth diameters in the maxillary arch exceeded that in the mandibular arch by 8 to 12 mm .In 1949, Neff ³ developed the “anterior coefficient,” he concluded, “that everything else being normal an orthodontic or non-orthodontic arch will settle to the degree of overbite indicated by the anterior coefficient.”

In 1954 Lundström⁴ showed a large biologic dispersion in the tooth width ratio and said it was great enough to have an impact on the final tooth position, teeth alignment and overbite and overjet relationships. Ballard⁵ (1956) in a study of 400 orthodontic cases, revealed an excess of at least 2 mm of mesiodistal tooth width in the mandibular anterior segment when compared to the maxillary anterior teeth in over 50% cases.

In 1958 Bolton⁶ evaluated 55 cases with “excellent” occlusion, 44 had been treated orthodontically without extractions and 11 were untreated. He stated that a correct maxillary and mandibular mesiodistal tooth size relationship is important to the achievement of proper occlusal interdigitation. He computed the specific ratios of the mesiodistal widths that must exist between maxillary and mandibular teeth from both canine-canine and first molar-first molar so as to obtain optimum occlusion. The following ratios were established by:

• Overall ratio = 91.3% , the standard deviation was 1.91%
• Anterior ratio = 77.2% , the standard deviation was 1.65%

Bolton⁷ in 1962 presented another article dealing with the clinical application of his tooth-size analysis. He reported that the overall ratio should not be used as a specific guide to the predicted occlusion after the removal of four premolars. He explained that a ratio set-up between arcs of unequal length (such as dental arches) would not remain constant when segments (premolars) of approximately equal size were removed from each arch. Bolton further stated that after the extraction of four premolars, patients in whom no tooth-size discrepancy existed would have an overall ratio that fell in a range from 87% to 89%.

The Aim of This Study

This study was done in order:

1. To investigate whether the extraction of four premolars as a requirement of orthodontic therapy is a factor in creating tooth size discrepancy.
2. To determine whether any tooth extraction combination creates more severe discrepancies.
3. To investigate the reasons behind such discrepancies if determined due to any extraction combinations

Materials and Methods

This study was conducted from 48 pretreatment models with malocclusions that did not have appreciable Bolton’s tooth size discrepancies. Their overall ratio fell within 91.3% ± 1 SD. Models were taken from a total sample of 310 study casts. Out of 48 pretreatment models, 30 models had Angle’s Class I molar and canine relations and 18 had Class II molar and canine relations.

Criteria for Selection

1.    All permanent teeth till first molars are sufficiently erupted.

2.Patients with severe interproximal caries, lesions or restorations are not used.

3. All had Bolton’s overall ratio of 91.3% ± 1 SD.

4.No attempt was made to select patients on the basis of age, sex or classification of malocclusion and therefore arch depth, axial inclination, overbite or overjet are not taken into consideration.

Using a Digital vernier caliper with an accuracy of 0.01 mm the following measurements are taken:

From the pretreatment models the mesiodistal dimension of the teeth were taken. The widest points on the mesio distal direction on each tooth are measured. All measurements are in millimeters (Figure 1).

The same investigator performed all measurements. For method error evaluation, 10 casts were selected at random, two weeks after the original measurements. The teeth were remeasured on these casts. The first and second measurements were compared.   No significant differences between the two sets of measurements (P > 0.05) were found when Wilcoxon’s non-parametric test was done.

These measurements were recorded and subjected to Bolton’s analysis: the overall ratio, anterior ratio and Bolton’s discrepancy was calculated.

Hypothetical tooth extractions were performed on each cast by simply substituting zero for that tooth. Following combinations of extractions were performed.

1. All first premolars
2. All second premolars
3. Upper first and lower second premolars
4. Upper second and lower first premolars

These measurements were again used to calculate Bolton’s discrepancy after premolars extraction for every extraction combination one by one.

The values obtained were subjected to statistical test and evaluation

Results

In all 48 cases hypothetical premolar extractions were performed by simply substituting zero for that tooth. Bolton’s method was used to find the discrepancy for all combinations. They all produced statistically significant discrepancy in the overall 10 ratio with a P value of 0.000.

Table 1 shows the Bolton values after four combination of premolars extractions, expressed as mean, SD with P value and standard error mean are shown. (The negative value indicates tooth material deficiency and positive value indicates tooth material excess)

Table 1: Bolton values given after four combination of premolars extraction combination, expressed as mean, SD with P value and standard error mean

TABLE 1
Extraction combinations		Mean	SD	P Value	Std Error Mean
All first premolars        n = 30	Maxilla	-1.72	0.74	0.000	0.135
	Mandible	1.51	0.66	0.000	0.120
All second premolars  n = 30	Maxilla	-1.06	1.04	0.000	0.190
	Mandible	0.99	0.88	0.000	0.161
Upper first &lower second premolars       n = 30	Maxilla	-1.72	1.14	0.000	0.208
	Mandible	1.560	0.960	0.000	0.176
Upper second & lower first premolars              n = 30	Maxilla	-0.85	1.14	0.000	0.208
	Mandible	0.81	1.21	0.000	0.221

All first premolars extraction produced mean deficiency of maxillary overall tooth material of 1.72 mm with a SD of 0.74 and mean mandibular excess of 1.51 mm with SD of 0.66.

All second premolars extractions produced a mean deficiency of maxillary tooth material of 0.85 mm with SD of 1.14 and a mean mandibular excess of 0.81 mm with a SD of 1.21

Upper first premolars and lower second premolars extraction produced a mean maxillary deficiency of 1.72 mm with a SD of 1.14 and mandibular excess of 1.56 mm with SD of 0.96

Upper second premolars and lower first premolars extraction produced a mean maxillary deficiency of 1.06 mm with a SD of 1.04 and mandibular excess of 0.99 mm with SD of 0.88

When multiple comparisons were done between the groups, there is a significant difference between all second premolars extraction group and upper first and lower second premolars extraction group with a P value of 0.001 in maxilla and with a P value of 0.004 in mandible.

The upper first premolars and lower second premolars extraction group produced the maximum discrepancy and all second premolars extraction group produced the least discrepancy

(Figure 1 and Figure 2).

Figure 1: The effect of various premolars extraction combination on Bolton’s tooth size discrepancy in maxilla and mandible. Click here to view full figure

 

Figure 2: The effect of various premolars extraction combination on Bolton’s tooth size discrepancy in maxilla and mandible.  Click here to view full figure

 

Discussion

It is widely accepted that a correct maxillary and mandibular mesiodistal tooth size relationship is important to the achievement of proper occlusal interdigitation in the finishing stages of orthodontic treatment.Though many authors ^2-5 had attempted to quantify this relationship, it was Wayne Bolton in 1958 ⁶ who computed the specific ratios of the mesiodistal widths that must exist between maxillary and mandibular teeth from both canine-canine and first molar-first molar so as to obtain optimum occlusion.

The intended purpose of tooth size discrepancy ratio as a diagnostic aid as said by Bolton is “…To gain insight into the functional and esthetic outcome of a given case without the use of diagnostic set up”.Till date this diagnostic setup remains the golden standard for predicting interarch tooth-size discrepancy and is widely used due to the fact that, the measurements are easily and quickly made. In a subsequent paper, Bolton⁷ expanded on the clinical application of his tooth size analysis. Bolton’s standard deviations from his original sample have been have been used to determine the need for reduction of tooth tissue by interdental stripping or the addition of tooth tissue by restorative techniques.

Inspite of its prevalent use, the reliability of Bolton’s analysis is still debated. Though some authors like Stifter ⁸, Hashim⁹ have agreed that Bolton’s ratio is applicable, the validity and accuracy of this analysis has been repeatedly challenged by authors like shellart¹⁰ Redahan ¹¹  have said that Bolton’s ratio must be used with caution while using it in a severely crowded dentition^12,13, or with abnormal tooth morphology and thickness ^14,15,16,17. Doubts have been raised about the reliability of applying this analysis to all cases with varied malocclusions ^{18,19,20,21,22,23} in various populations^24,25,26.^27,28,

One  criticism on Bolton’s study is that apart from a small sample size, the estimates of variation is underestimated because his sample size is derived from perfect Class I occlusion ¹⁸. Studies have shown that ^{13,16,29,30,31,32.33} the change in the tooth-size arch length relationship is multifactorial depending on factors like overbite ^34,35overjet ^{5, 6}, inclination of anteriors ^36,37, intercanine width ^{18, 38}, intermolar width ³⁰ arch width ³⁹ and curve of spee ⁴⁰

Recent  studies have raised the need for developing a new formula to forecast tooth –size discrepancies in patients based on not only the size of the whole teeth but also functional arch components derived from normal cusp- fossa interdigitation ^41,by including tooth thickness⁴²archdepth ⁴³ etc

 The effects of extraction:In his second paper, Bolton⁸ discussed the effect of premolar extraction on the overall ratio. Bolton correctly stated that premolar extraction would mathematically reduce the suggested overall mean ratio value of 91.3%. After the extraction of 4 premolars, patients in whom no TSD existed would have an overall mean ratio of 88%.

The results of this study showed that after premolar extraction, the Overall 10 ratio is increased to a much higher level than 88% which was proposed by Bolton in 1962 .The mean ratio is 89.14 % which is closer to the ratio obtained (89.28%) by Kayoliogu ⁴⁴

Extraction of premolars produced mandibular tooth material excess and maxillary tooth material deficiency. When various hypothetical extraction combinations were performed, the results (Table 1) indicate that upper first premolars and lower second premolars extraction group produced the highest discrepancy followed by all first premolars extraction group. This result differs from that of Saatci ⁴⁵ who observed that all first premolars extraction group produced the greatest discrepancy. But when multiple comparisons were done between the groups, it was shown that there was   no significant difference between the all first premolars extraction group and upper first premolars and lower second premolars extraction group.

The results also showed that all second premolars extraction group produced the least discrepancy, which agrees with that of the Saatci³⁶  and Tong et al⁴⁶ studies .Hence the Bolton’s overall ratio with respect to changing the pattern of extractions has variable results .

Conclusion

This study evaluated the effect of premolars extraction on overall Bolton’s tooth size discrepancy and arrived at the following conclusions.

• The upper first and lower second premolars extraction group produced the highest discrepancy followed by all first premolars extraction group.
• The all-second premolars extraction group produced the least discrepancy.

Hence the Bolton’s overall ratio with respect to changing the pattern of extractions produces statistically significant discrepancy. So the clinician must be aware of this before and Bolton’s tooth size discrepancy should be included as one of the factors before deciding on extaction pattern.

Refrences

1. Black GV.Dental anatomy,Piladelphia:SS white Dental Manufacturing:1902
2. Gilpatric WH. Arch predetermination – is it practical? Journal of the American Dental Association 1923; 10:553-572.
3. Neff CW.Tailored occlusion with the anterior coefficient.American Journal of Orthodontics 1949; 35:309-313.
4. Lundstrom A. Inter –maxilla tooth width ratio and tooth alignment and occlusion. Acta Odont Scand 1954; 12:265-92.
5. Ballard, M.L: A Fifth column within normal dental occlusion. American Journal of Orthodontics, 1956.
6. Bolton WA. Disharmony in tooth size and its relationship to the analysis and treatment of malocclusion.Angle Orthodontist, 1958; 28:113-130.
7. Bolton WA. The clinical application of tooth size. American Journal of Orthodontics, 1962; 48:504-529.
8. Stifter John. A study of Pont’s, Howes’, Rees’, Neff’s and Bolton’s analysis on Class I adult dentitions. Angle orthodontist 1958 ;28(4): 215-225.
9. Al-Tamimi T, Hashim HA. Bolton tooth-size ratio revisited. World Journal of Orthodontics. 2005 Fall;6(3):289-95.
10. Shellhart WC, William Lange, Thomas G Kluemper, Preston Hicks and Allan L Kaplan. Reliability of the Bolton tooth-size analysis when applied to crowded dentitions. Angle Orthodontist 1995; 65(5): 327 – 334.
11. Redahan S and L. Lagerström .Orthodontic treatment outcome: The relationship between anterior dental relations and anterior inter-arch tooth size discrepancy. Journal of Orthodontics.2003 Sep; 30 (3); 237-244.
12. Hashim and Ghambi .Tooth width and arch dimensions in normal and malocclusion samplies: An odontometric study. Journal of Contemporary Dental Practice 2005 May (6) 2:036-051.
13. Bernabe E, Villanueva KM and Flores-Mir .Tooth width ratios in crowded and non crowded dentitions. Angle Orthodontist 2004 Dec; 74(6):765-768.
14. Demetrios J. Halazonetis The Bolton ratio studied with the use of spread sheets. American Journal of Orthodontics and Dentofacial Orthopedics .1996 Feb; 109(2)215 -9.
15. Rossouw PE, Preston CB, Lombard CJ and Truter JW. A Longitudinal evaluation of the anterior border of the dentition. American Journal of Orthodontics and Dentofacial Orthopedics, 1993 Aug 104(2):146 – 152.
16. Peck H and Peck S. An index for assessing tooth shape deviations as applied to the mandibular incisors. American Journal of Orthodontics and Dentofacial Orthopedics, 1972 Apr; 61(4):384 – 401.
17. Sayin MO and Turkkahraman H .Factors contributing to mandibular anterior crowding in the early mixed dentition. Angle Orthodontist 2004 Dec;74(6):754-758.
18. Nie Q and Lin J .Comparision of intermaxillary tooth size discrepancies among different malocclusion groups. American Journal of Orthodontics and Dentofacial Orthopedics 1999 Nov; 116(5): 539-44.
19. Aroujo and Souki Bolton anterior tooth size discrepancies among different malocclusion groups. Angle Orthodontist 2003; 73:307-313.
20. Uysal T, Sari Z, Basciftci FA and Memili B. Intermaxillary tooth size discrepancy and malocclusion: is there a relation? Angle Orthodontist 2005; 75 (2): 208-213.
21. Freeman JE, Maskeroni AJ and Lorton L .Frequency of Bolton tooth-size discrepancies among orthodontic patients .American Journal of Orthodontics and Dentofacial Orthopedics,1996 Jul;110(1): 24 – 27.
22. Basaran G, Selek M, Hammaci O and Akkus Z. Intermaxillary Bolton anterior tooth size discrepancies among different malocclusion groups. Angle Orthodontist 2006; 76(1):26-30.
23. Douglas R. Crosby and Charles G. Alexander. Occurrence of tooth size discrepancies among different malocclusion groups. American Journal of Orthodontics and Dentofacial Orthopedics, 1989 Jun; 95(6):457 – 461.
24. Nourallah AW, Splieth CH, Schawahn C, Khurdaji M .Standardizing interarch tooth- size harmony in a Syrian population. Angle Orthodontist 2005 Nov; 75(6):996-999.
25. Smith SS, Bushang PH and Watnabe E. Interarch tooth size relationships of 3 populations: “Does Bolon’s analysis apply?” American Journal of Orthodontics and Dentofacial Orthopedics 2000 Feb; 117(2):169-74.
26. Ta TA, Ling JY and Hagg U. Tooth-size discrepancies among different occlusion groups of southern Chinese children. American Journal of Orthodontics and Dentofacial Orthopedics 2001 Nov; 120(5): 556-8.
27. Uysal T and Sari Z. Intermaxillary tooth size discrepancy and mesiodistal crown dimensions for a Turkish population. American Journal of Orthodontics and Dentofacial Orthopedics, 2005 Aug; 128:226-230.
28. Paredes V, Gandia JL and Cibrian R. Do Bolton’s ratios apply to a Spanish population? American Journal of Orthodontics and Dentofacial Orthopedics. 2006 Mar; 129(3): 428-30.
29. Othman SA and Harradine NWT. Tooth-size discrepancy and Bolton’s ratios: a literature review, Journal of Orthodontics. 2006 Mar; 33 (1): 45-51.
30. Bernabe E, del Castillo CE and Flores-Mir C. Intra arch occlusal indicators of crowding in the permanent dentition. American Journal of Orthodontics and Dentofacial Orthopedics, 2005 Aug; 128(2):220-225.
31. Bishara SE ,Treder JE, Damon P and Olsen M .Changes in the dental arches and dentition between 25 and 45 years of age. Angle Orthodontist 1996; 66(6), 417- 422.
32. Bishara SE, Khadivi P, Jakobsen JR.Changes in tooth size-arch length relationships from the deciduous to the permanent dentition: a longitudinal study. American Journal of Orthodontics and Dentofacial Orthopedics, 1995 Dec; 108(6): 607-13.
33. Gary A. Carter, and James A. McNamara Jr: Longitudinal dental arch changes in adult’s .American Journal of Orthodontics and Dentofacial Orthopedics, 1998 Jul; 114(1)88 – 99.
34. Bishara SE, Jakobsen JR, Treder JE, and Stasi MJ. Changes in maxillary and mandibular tooth size-arch length relationship from early adolescence to early adulthood. A longitudinal study. American Journal of Orthodontics and Dentofacial Orthopedics 1989 Jan; 95(1):46 – 59.
35. Steadman S and Sherwood R. Predetermining the Overbite and Overjet. Angle Orthodontist 1949; 19(2): 101-105.
36. O’Higgins EA, Kirschen RH and Lee RT. The influence of maxillary incisor inclination on arch length. Journal of Ortodontics 1999 June; 26(2):97-102.
37. Tuverson DL. Anterior interocclusal relations: Part I. American Journal of Orthodontics and Dentofacial Orthopedics, 1980 Oct; 78(4):361 – 370.
38. Fastlicht J.Crowding of mandibular incisors. American Journal of Orthodontics and Dentofacial Orthopedics, 1970 Aug: 58(2): 156 – 163.
39. Ward, Workman,Brown,Richmond Changes in arch width – A 20 – year longitudinal study of orthodontic treatment. Angle Orthodontist 2006; 76:6-13
40. Heusdens M, Dermaut L and Verbeck R .The effect of tooth size discrepancy on occlusion: An experimental study. American Journal of Orthodontics and Dentofacial Orthopedics, 2000 Feb; 117(2):184-91.
41. Emil Bailey,Gerald Nelson et al: Predicting tooth-size discrepancy: A new formula utilizing revised landmarks and 3- dimensional laser scanning technology ,American Journal of Orthodontics and Dentofacial Orthopedics, 2013Apr; 143(4)574-585
42. Rudolph, Dominguez, K. Ahn, T.Thinh The use of tooth thickness in predicting intermaxillary tooth-size discrepancies Angle Orthodontist, 1998 No. 2, (133 – 138)
43. Stanley Braun and William P. Hnat A new accurate approach to the anterior ratio with clinical applications Part 1: A computer program   AJO-DO, Volume 1999 April (368-72)
44. Kayolioglu M, Toroglu and MS, Uzel I.  Tooth- size ratio for patients requiring 4 premolar extractions. American Journal of Orthodontics and Dentofacial Orthopedics, 2005 Jul; 128(1):78-86.
45. Saatçi Pinar and Filiz Yukay .The effect of premolar extractions on tooth-size discrepancy American Journal of Orthodontics and Dentofacial Orthopedics,1997 Apr;111(4):428 – 434.
46. Tong H,Chen D,XuL, Liu P The effect of premolar extractions on tooth size discrepancy Angle Orthodontist 2004;74 (4):508-11.
47. .Paredes V, Gandia JL and Cibrian R.Determination of Bolton tooth-size ratios by digitization, and comparison with the traditional method. European Journal of Orthodontics 28 (2006) 120–125
48. Steyn CL, Harris AM and R.J. du Preez.Anterior arch circumference adjustment – how much? Angle Orthodontist 1996; 66(6); 457– 462.
49. S. A. Othman, N. W. T. Harradine Tooth-size Discrepancy and Bolton’s Ratios: a literature review, Journal of Orthodontics 2006 Mar; Vol. 33: 45-51

(Visited 984 times, 1 visits today)