Chaudhari U. E, Somwanshi A. R. Evaluation of Adsorption Efficiency of Alangium Salvifolium Tree Bark for Methylene Blue Retrieval from Aqueous Solution. Biomed Pharmacol J 2010;3(2)
Manuscript received on :March 17, 2010
Manuscript accepted on :August 12, 2010
Published online on: 25-11-2015
How to Cite    |   Publication History
Views Views: (Visited 184 times, 1 visits today)   Downloads PDF Downloads: 437

U. E. Chaudhari and A. R. Somwanshi

Department of Chemistry, M.F.M. Warud, Dist. Amravati (India).

Abstract

Methylene Blue adsorption from an aqueous solution on to Alangium salvifolium Tree Bark (ASTB) has been studied experimentally using the batch adsorption method. The operating variables studied are pH, initial dye concentration contact time. Adsorption isotherm (Langmuir and Freundlich) and kinetics model were studied. The adsorption capacity of ASTB was found to increasing with in temperature. Thermodynamics parameters such as DG, DH and DS for adsorption were evaluated. Adsorption of Methylene Blue on ASTB found to be endothermic process. The aim of present work is to study the effectiveness of the adsorbent to remove dyes from their aqueous solution and the removal of color from textile and various industrial waste water.

Keywords

Adsorption Alangium salvifolium Tree Bark; Methylene Blue; Adsorption kinetics

Download this article as: 
Copy the following to cite this article:

Chaudhari U. E, Somwanshi A. R. Evaluation of Adsorption Efficiency of Alangium Salvifolium Tree Bark for Methylene Blue Retrieval from Aqueous Solution. Biomed Pharmacol J 2010;3(2)

Copy the following to cite this URL:

Chaudhari U. E, Somwanshi A. R. Evaluation of Adsorption Efficiency of Alangium Salvifolium Tree Bark for Methylene Blue Retrieval from Aqueous Solution. Biomed Pharmacol J 2010;3(2). Available from: http://biomedpharmajournal.org/?p=1649

Introduction

The retrieval of color from industrial effluent is a major problem as restriction become more stringent. Effluents from textile pulp and paper industries are highly colored due to residual dyes, and thus lower the aesthetic value structure and are toxic and harmful for aquatic and human life. The presence of color in water inhibits the growth of aquatic fauna and flora by reducing light penetration. Various techniques, such as Chemical, Coagulation, Bio-sorption, Oxidation using ozone and adsorption have been generally employed for retrieval of color. Adsorption is one of the most effective physical process and has a great potential for the removal of dyes from wastewater. The aim of this study was to prepare to activated carbon from Alangium salvifolium Tree Bark and adsorption isotherm was developed for Methylene Blue dye, which can be readily used to designing purpose in pollution amendment and control.

Material and Methods

Adsorbent preparation

The adsorbent Alangium salvifolium Tree Bark (ASTB) was collected from the Pandhari forest situated in between Warud and Padhuran. The Alangium salvifolium Tree Bard was first dried at a temperature of 160°C for six hours. After grinding it was then soaked overnight in 0.1N NaOH solution to remove the lignin content, excess alkalinity was then neutralized with 0.1 N HCl solution.

It was washed with distilled water several time till the wash water become colorless. Then it was kept in muffle furnace at 130°C for 6 hrs. It was sieved to obtain average particle size of 200 mesh. Finally it was dried again in an over at 50°C for 6 hours. The adsorbent was then stored in desiccators for final studies.

Results and Discussion

Effect of Initial dye concentration & contact time

The initial concentration of Methylene Blue solution was varied from 20, 30, 40, 60 mg/L and batch experiments were carried out by taking 220ml of this soln with dried 200 mg of the adsorbent and the system is equilibrated by shaking the contents of the flask at room temperature, equilibrium time for maximum uptake and to know the kinetics of adsorption process, the adsorption of Methylene Blue on adsorbent was studied as function of contact time. Percentage removal of dye is found to decrease with increase in dye concentration. From contact time data it may be seen that dye removal is very rapid during initial period of contact and the maximum are reached within the first 30 minutes removal.

Effect of sorbent dosage

Batch sorption studies were performed to determine the effect or sorbent dosage on Methylene Blue removal. The percent removal increase rapidly and reaches about 95%. For 100% removal of the Methylene Blue, the dosage required is 300mg/50ml for the initial concentration of 50 mg/L at pH = 8.q.

Sorption Kinetics

The rate of adsorption of Methylene Blue on Alangium Salvifolium Tree Bard was studied by using the first order kinetic model, Pseudo second order kinetic and Elovich models are used to test the experimental data.

First order kinetics

The rate of adsorption of Methylene Blue on (ASTB) was studied by using the first order rate equation proposed by Lagergren. It is found that as initial dye concentration increase. Lagergren rate constant decrease. This indicate that, adsorption does not follow the 1st order kinetics.

Pseudo Second order models

In Pseudo order model, it is found that, Rate constant K2 is almost constant at different initial concentration which is shown in Table 1. This indicate that adsorption of M.B. on Alangium salvifolium Tree Bark obey the 2nd order kinetics. Also the concentration of Methylene Blue increasing from 20mg/L to 60mg/L, equilibrium sorption capacity qe increase.

Elovich Model

Adsorption of Methylene Blue an Alangium Salvifolium Tree Bark are shown in figure 7. A linear relationship is obtained betn the amount of M.B. adsorbed, qt and Int. From the table 1, show that value µ and b varied as a function of Methylene Blue concentration. As the concentration of Methylene Blue increase from 20mg/L to 60mg/L. Value µ increase and b decrease. This favoured the adsorption phenomenon.

Isotherm Modeling

Langmuir Adsorption Isotherm

The Langmuir sorption isotherm is  given in table 2. Q0 values found to be comparable with commercial activated carbon. Value of RL lies between 0 and 1 indicate the favourable adsorption. It indicates the applicability of Langmuir adsorption isotherm. The calculated vlaue r² confirm the applicability of Langmuir adsorption isotherm.

Freundlich Adsorption isotherm

Freundlich plot for the adsorption of Methylene Blue on Ferromia elefuntum Fruit Shell and the result of Freundlich plot are given in
Table 2. It show that value of adsorption intensity 1/n <1, reveal the applicability of Freundlich adsorption.

Table 1: Kinetic model value for adsorption of Methylene Blue on ASTB

Concent-         1st order Pseudo second order           Elovich
ration KL qe qe k2 µ b
20 mg/L 0.0307 7.6 0.997 9.021 0.0016 0.998 0.4948 0.1506 0.9997
40 mg/L 0.0284 14.4 0.974 16.182 0.0414 0.9821 1.306 0.8732 0.986
60 mg/L 0.02612 20.1 0.988 20.39 0.0013 0.9723 2.246 0.1005 0.976

 

Table 2: Isothermal Constants

Temperature             Langmuir constants               Freundlich constants
°C b L/mg Q0 mg/g RL 1/n kf
30°C 0.0461 24.89 0.671 0.999 0.479 1.449 0.997
40°C 0.0251 26.77 0.7346 0.987 0.595 3.455 0.982
50°C 0.024 30.25 0.434 0.961 0.472 4.273 0.989

 

Table 3: Thermodynamics parameters.

Temperature DS DG
30°C -0.6521
40°C 0.06133 -83.3488
50°C -340.36

 

Thermodynamics parameters

The influence of temperature upon the adsorption rate was investigated at 30°C, 40°C and 50°C. It is observed that mass of the M.B. adsorbed per unit mass of adsorbent increase with increasing temperature. The heat of adsorption was calculated by plotting a graph of 1nKL, versus reciplocal of temperature. The negative value of free energy change DG indicates the feasibility and spontaneous nature of adsorption of Methylene Blue. DH value suggests endothermic nature of Methylene Blue on Alangium Salvifolium Tree Bark. Positive values of DS is due to increase randomness during adsorption of Methylene Blue.

Conclusions

Alangium Salvifolium Tree Bark was studied as good adsorbent for removal of methylene Blue. The removal is found rapid on initial stage followed by slow adsorption upto saturation level. It also depend an initial concentration of adsorbate and agitating time.

The present work on adsorption process is in good agreement with Langmuir & Freundlich isotherm indicating monolayer adsorption process.

The results on adsorption process reveals that at pH = 8.0, Methylene Blue uptake capacity is better.

The adsorption of Methylene Blue on ASTB followed the Pseudo second order model and Elovich model.

Study of temperature effects on Freundlich parameters reveals increasing trend in adsorption capacity with increase in temperature. It followed the endothermic process.

It is calculated that the adsorbent prepared from (ASTB) could be exploited for commercial applications. Regeneration studies are not necessary with the view that the cost of the adsorbent is very low and it can be disposed of safely.

References

  1. B. D. Gharde, S. B. Gholese, P. V. Patil, “Removal of Cu (II) and Ni(II) from solution using Alangium Salvifolium Tree Bark”, proceeding of NSAM, 116-119 (2004).
  2. V. W. Lhangan, D. B. Bnakar and S.S. Dara effectiveness of Terminalia bellerica bark for scavenging zinc ions. Chem. Environment Res., 1(1): 87-94 (1992).
  3. P. R. Rampure and P. V. Patil. Use of palsa Bark substrate for the recovery of Cu, Pb, Zn, Ni from waste-water Jr. of Industrial pollution control 12(1) (1996).
  4. R. Bankar and M. Arivazhnan, “Secondary Baggase pith (SPB) as Adsorbents for color Removal from textile wastewater”, RAWM (2001).
  5. C. Mary Sukanya and A.V.S. Prabhakara Rao, “Color Removal from Waste Effluents using waste Activated Carbon”, R.A.W.M. (2001).
  6. Rashmi Sanghi and Bani Bhattachrya, “Comparative Decolourisation study of Malachite Green Dye solutions using synthetic and Natural Cwagulaton “Res. J. Chem. Environ. 5(2).
  7. Rashmi Sanghi and Bani Bhattachrya, “Decolourisation of malachite Green Dye solutions using tree barks as low cost adsorbents”, Journal IAEM, 29: 129-135 (2002).
  8. Daga Kailash, Gehlot Poonam and Mehta Rishika, “Comparative study and Treatment of synthetic Dye water using poly vinyl. Alcohol coated activated wood charcoal as adsorbent”. Res J. Chem. Environ. 14(4) (2007).
  9. Geetha A., Sivakumar P., “Adsorption of Acid Blue from an aqueous solution on to activated Areca Nut Shell Carbon, Equilibrium, kinetic and thermodynamics studies”, Res. J. Chem. Envrim. 13(1) (2009).
  10. Lagergren, S and Bil K, Svenska Vatenskapsakad hand 24 (1998).
  11. Chien S.H. and Clayton W.R., Application of Elovich equation to kinetic of phosphate Release and sorption of soil. Sci. So. Am. J., 44: 265-268 (1980).
Share Button
(Visited 184 times, 1 visits today)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.